HIWARM COMPACT

HIWARM COMPACT

10 - 29 kW

BLDC inverter multifunctional heat pumps, package type, air condensation; outdoor installation.

Plus

  • Tax relief
  • BLDC compressor
  • Built in modulating hydronic unit

Caractéristiques et Versions

  • Exécution monobloc
  • Ventilateurs axiaux
  • Chaud froid
  • Réfrigérant R410A
  • Compresseur scroll EC
  • Polyvalente système à 2 tubes
  • Récupération totale
  • 5 models
  • Cooling
  • Heating
  • DHW production
  • Total Heat Recovery

Caractéristiques techniques

HIWarm Compact is a multifunctional heat pump with total condensation heat recovery. Exchanging heat with the outdoor air it permits to air-condition the environment and to produce hot water for sanitary purposes without using heating elements. During cooling operation in summertime it permits to produce hot water and chilled water at the same time.

 

The main constructive features of HiWarm are:


- Double water circuit.


- Air conditioning circuit with reversibility on the cooling circuit side and the water side


- DHW circuit with total recovery (in the event of simultaneous cooling) or in any case with recovery as a priority. This circuit is separate and unlike in other similar products on the market it does not require long heating/cooling phases for inertial storage which impair energy efficiency, above all in summertime.


- BLDC brushless scroll or twin-rotary compressors - AISI 316 High efficiency exchangers with braze-welded plates - Highly efficiency fans


- Expansion valve: EEV (electronically controlled electric thermal expansion valve) to take advantage from the possibility of generating thermodynamic cycles under reduced pressure difference, resulting in clear benefits in terms of COP.


- Integrated control of pumps on the system side and the DHW side: both pumps are modulating


- Advanced electronic control, which makes it possible to respond in a suitable manner to requirements under part load conditions. These critical components ensure optimal part-load operation, something that is increasingly taken into consideration and a discriminating element in the technical choices of thermal engineers.
 

Composants principaux

 Contrôleur à microprocesseur

Contrôleur à microprocesseur

Développé selon les plus récentes technologies avancées, le contrôleur à microprocesseur assure la gestion complète des unités HIWARM COMPACT par l'intermédiaire d'un logiciel conçu à cet effet par Galletti.

Structure

La structure est réalisée en tôle zinguée laquée a été conçue pour résister aux conditions atmosphériques et permettre un accès facile aux composants internes pour les interventions de maintenance.

Vanne de détente électrique à contrôle électronique

L'adaptation rapide aux variations des pressions d'exercice et l'intégration à l'action du compresseur, il représente un des organes clé des unités en assurant efficacité et stabilité de fonctionnement.

Batterie d’échange thermique

L'échangeur à bloc aileté est réalisé en tubes de cuivre fixés mécaniquement aux ailettes en aluminium. La conception soignée de ces éléments assure le maximum d'efficacité dans toutes les phases de fonctionnement et facilite les phase de dégivrage.

Compresseur

Il est installé dans un compartiment fermé pouvant être insonorisé avec un matériau approprié. De type hermétique twin-rotary ou scroll actionné par un moteur à aimants permanents BLDC il est fixé au bâti au moyen de supports antivibratoires.

Kit hydraulique

Les circulateurs centrifuges côté installation et côté ECS, sont de type modulant avec turbine en acier inox permettant leur fonctionnement en présence de mélanges d'eau et glycol d'éthylène jusqu'à 35%. Sont prévus également un vase d'expansion et le robinet de charge automatique.

Souhaitez-vous plus d’informations ?


Contactez-nous dès maintenant en remplissant le formulaire

;