HIWARM COMPACT

HIWARM COMPACT

10 - 29 kW

BLDC inverter multifunctional heat pumps, package type, air condensation; outdoor installation.

Plus

  • Tax relief
  • BLDC compressor
  • Built in modulating hydronic unit

Features and Versions

  • Packaged unit
  • Axial fan
  • Cooling / Heating
  • R-410A refrigerant
  • EC scroll compressor
  • Multi-purpose unit - 2-pipe system
  • Total heat recovery multi-purpose unit
  • 5 models
  • Cooling
  • Heating
  • DHW production
  • Total Heat Recovery

Technical characteristics

HIWarm Compact is a multifunctional heat pump with total condensation heat recovery. Exchanging heat with the outdoor air it permits to air-condition the environment and to produce hot water for sanitary purposes without using heating elements. During cooling operation in summertime it permits to produce hot water and chilled water at the same time.

 

The main constructive features of HiWarm are:


- Double water circuit.


- Air conditioning circuit with reversibility on the cooling circuit side and the water side


- DHW circuit with total recovery (in the event of simultaneous cooling) or in any case with recovery as a priority. This circuit is separate and unlike in other similar products on the market it does not require long heating/cooling phases for inertial storage which impair energy efficiency, above all in summertime.


- BLDC brushless scroll or twin-rotary compressors - AISI 316 High efficiency exchangers with braze-welded plates - Highly efficiency fans


- Expansion valve: EEV (electronically controlled electric thermal expansion valve) to take advantage from the possibility of generating thermodynamic cycles under reduced pressure difference, resulting in clear benefits in terms of COP.


- Integrated control of pumps on the system side and the DHW side: both pumps are modulating


- Advanced electronic control, which makes it possible to respond in a suitable manner to requirements under part load conditions. These critical components ensure optimal part-load operation, something that is increasingly taken into consideration and a discriminating element in the technical choices of thermal engineers.
 

Main components

 Microprocessor control

Microprocessor control

Developed according to the most recent technologies, the microprocessor control allows the complete management of HIWARM COMPACT units through a specifically designed software by Galletti.

Structure

The cabinet, made of galvanized and painted sheet, has been created to resist to atmospheric agents and allow a comfortable access to the internal components for maintenance.

Electronically controlled electric expansion valve

By rapidly adjusting to the variation of workloads and thus integrating the activities carried out by the compressor, it represents one of the key components of the units and it assures the efficiency and stability of its operation.

Heat exchanger

The finned exchanger is made of copper pipes mechanically fixed to aluminium fins: thanks to the accurate design, it guarantees the maximum efficiency in every operating mode and it facilitates defrosting phases.

Compressor

It is housed in a completely closed space and it is further made soundproof through the use of soundproofing insulation. Hermetic twin-rotary or scroll activated by a BLDC permanent magnet motor is fixed on the base though anti-vibration dampers.

Hydraulic kit

The centrifugal circulators (both system and DHW side) can be of modulating type with a stainless steel impeller which allows the operation with water mixtures and ethylene glycol up to 35%. Moreover, an expansion tank and an automatic loading tap are included.

Do you want more information?

Contact us now by filling out the form

;